User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the router
- Chapter 3. Quick Setup
- Chapter 4. Basic
- Chapter 5. Advanced
- 5.1 Status
- 5.2 Network
- 5.3 Dual Band Selection
- 5.4 Wireless 2.4GHz
- 5.5 Wireless 5GHz
- 5.6 Guest Network
- 5.7 DHCP
- 5.8 USB Settings
- 5.9 NAT Boost
- 5.10 Forwarding
- 5.11 Security
- 5.12 Parental Control
- 5.13 Access Control
- 5.14 Advanced Routing
- 5.15 Bandwidth Control
- 5.16 IP & MAC Binding
- 5.17 Dynamic DNS
- 5.18 IPv6 Support
- 5.19 System Tools
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
Archer C9 AC1900 Wireless Dual Band Gigabit Router
- 18 -
port and then click the Save button. To access the USB drive for example from a
Windows computer:
i. Select Start > Run.
ii. Enter ftp://WAN IP:port
in the dialog box and click the OK button.
Note:
If the port for FTP (Remote) is changed, the port for FTP will be changed to the same
port.
Sharing Mode
1) If Share All is selected, all the folders in the USB drive will be shared. Besides
Authentication will appear for you to choose or not.
2) If Share Selected Folders is selected, only the folders you specified will be shared.
Authentication
If Require Login is selected, you should use the username and password to log in.
4.4.2 Print Server
Choose menu “Basic→USB Settings→Print Server”, you can enable or disable the print server.
Figure 4-11 Print Server
4.5 Guest Network
Choose menu “Basic→Guest Network”, you can configure a wireless network for the guest,
including 2.4GHz and 5GHz.
Figure 4-12 Guest Network