User's Manual

Archer C9 AC1900 Wireless Dual Band Gigabit Router
- 26 -
Caution: Sometimes the connection cannot be disconnected although you specify a time to Max
Idle Time, because some applications are visiting the Internet continually in the background.
Click the Save button to save your settings.
5. If your ISP provides PPTP connection, please select PPTP/Russia PPTP option. And you
should enter the following parameters (Figure 5-8).
Figure 5-8 PPTP Settings
 VPN Server IP/Domain Name - Enter the IP address or domain name of the VPN server
provided by your ISP.
 User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
 Dynamic IP/ Static IP – Select Static IP if IP address, subnet mask, gateway and DNS server
address have been provided by your ISP. Otherwise, please select Dynamic IP.
 Connect on Demand - You can configure the router to disconnect from your Internet
connection after a specified period of inactivity (Max Idle Time). If your Internet connection
has been terminated due to inactivity, Connect on Demand enables the router to
automatically re-establish your connection as soon as you attempt to access the Internet
again. If you wish to activate Connect on Demand, check the radio button. If you want your
Internet connection to remain active at all times, enter “0” in the Max Idle Time field.
Otherwise, enter the number of minutes you want to have elapsed before your Internet
connection terminates.
 Connect Automatically - Connect automatically after the router is disconnected. To use this
option, check the radio button.