User's Manual

Archer C9 AC1900 Wireless Dual Band Gigabit Router
- 48 -
1) Egress Bandwidth For Guest Network - Specify the upload speed through the
WAN port for Guest Network.
2) Ingress Bandwidth For Guest Network - Specify the download speed through the
WAN port for Guest Network.
 Wireless 2.4GHz
 Enable Guest Network (2.4G) - Select this checkbox to enable 2.4GHz guest network.
 Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.
 Guest Number - Limit the number of the guest.
 Wireless Security - You can configure the security of Guest Network here.
 Access Time - During this time the wireless stations could access the AP.
 Wireless 5GHz
 Enable Guest Network (5G) - Select this checkbox to enable 5GHz guest network.
 Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.
 Guest Number - Limit the number of the guest.
 Wireless Security - You can configure the security of Guest Network here.
 Access Time - During this time the wireless stations could accessing the AP.

Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page “Bandwidth Control->Control Settings”.
5.7 DHCP
Figure 5-39 DHCP menu
There are three submenus under the DHCP menu, shown in Figure 5-39: DHCP Settings, DHCP
Clients List and Address Reservation. Click any of them, and you will be able to configure the
corresponding functions.
5.7.1 DHCP Settings
Choose menu “Advanced→DHCP→DHCP Settings”, you can configure the DHCP Server on the
page as shown in Figure 5-40.The router is set up by default as a DHCP (Dynamic Host
Configuratio
n Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the router on the LAN.