User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the router
- Chapter 3. Quick Setup
- Chapter 4. Basic
- Chapter 5. Advanced
- 5.1 Status
- 5.2 Network
- 5.3 Dual Band Selection
- 5.4 Wireless 2.4GHz
- 5.5 Wireless 5GHz
- 5.6 Guest Network
- 5.7 DHCP
- 5.8 USB Settings
- 5.9 NAT Boost
- 5.10 Forwarding
- 5.11 Security
- 5.12 Parental Control
- 5.13 Access Control
- 5.14 Advanced Routing
- 5.15 Bandwidth Control
- 5.16 IP & MAC Binding
- 5.17 Dynamic DNS
- 5.18 IPv6 Support
- 5.19 System Tools
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
Archer C9 AC1900 Wireless Dual Band Gigabit Router
- 81 -
5.18.1 IPv6 Status
Figure 5-96 IPv6 Status
The IPv6 Status page displays the router's current IPv6 status and configuration. All information is
read-only.
WAN
Connection Type - The IPv6 connection way for WAN
IPv6 Address - The WAN IPv6 address
IPv6 Default Gateway - The router's default gateway
Primary IPv6 DNS - The primary IPv6 DNS address
Secondary IPv6 DNS - The secondary IPv6 DNS address
LAN
IPv6 Address Assign Type - There are two types of assignation for IPv6 address:
SLAAC (Stateless address auto-configuration) and DHCPv6 (Dynamic Host
Configuration Protocol for IPv6) Server.
1) SLAAC
IPv6 Address Prefix -The Prefix of IPv6 Address
2) DHCPv6 Server
Release Time - the length of time a network user will be allowed to keep connecting
to the router with the current DHCPv6 Address. Enter the amount of time (in seconds)
that the DHCPv6 address will be leased. The time range is 1~691200 seconds. The
default value is 86400 seconds.
IPv6 Address - Displays the LAN IPv6 Address.