User's Manual

enabled, the AP would steer the dual band clients to connect to the 5GHz first, which
would balance the band connections.
Figure 4-9 Band Steering
Select the Enabled and click OK. The following page will be shown. Click Yes and wait a
second until the band steering is switched to Enabled.
Band Steering: Select Enabled and click OK to enable Band Steering feature.
Select Disabled and click OK to disable Band Steering feature.
5GHz Maximum
Connection
Threshold:
Specify the maximum number of clients that are allowed to connect
to the 5GHz band. When the client number meets the 5GHz maximum
connection threshold and difference threshold, the AP will prevent
more APs from connecting to the 5GHz band.
Difference
Threshold:
Specify the maximum difference value between the number of
clients connected to the 5GHz band and the number connected to
the 2.4GHz band. When the client connections meet the 5GHz
maximum connection threshold and the difference threshold, the AP
will prevent more APs from connecting to the 5GHZ band.
Security Mode: This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same
as your AP's security type.
Select the encryption type, including None and WPA-PSK/WPA2-
PSK. The default setting is None. Please refer to Security Mode
for
details.
18