User's Manual

Figure 4-7 WDS Settings
Manually
You should manually enter the parameters of the root AP. Click OK to finish the settings.
WDS: Check the box to enable WDS feature.
SSID:
The SSID of the AP your device is going to connect to as a client.
BSSID: The BSSID of the AP your device is going to connect to as a client.
Security Mode:
This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same as
your AP's security type.
Select the encryption type, including None and WPA-PSK/WPA2-PSK.
The default setting is None. Please refer to Security Mode
for details.
Advanced Settings
You can configure the advanced settings in this section. Improper configuration would
degrade the CAP’s wireless performance. With no special requirement, it is
recommended to keep the default settings.
Figure 4-8 Advanced Settings
Wireless Mode: Select the protocol standard for the wireless network.
16