User's Manual

Time: Specify the device’s time. Select the number from the drop-down

list in time format HH/MM/SS.

NTP Server I/NTP

Server II:

Please input the primary NTP sever address and an alternative NTP

server address.

Configuration Management

In this section, you can backup, restore, reset or reboot your CAP.

Figure 6-6 Configuration Management

Backup: Click Backup to save a copy of your current settings. Please save

your copy in a secure file location. It is recommended to back up the

settings before you change the configurations and upgrade the

firmware.

Restore: Click Browse to locate and select the backup file, then click Restore

to import the file to recover the configurations.

Factory Restore: Click Reset to restore your device to its factory default settings.

Reboot: Click Reboot to reboot your device. Do NOT power off your device

while it is rebooting.

Firmware Upgrade

Please log in http://www.tp-link.com/ to download the latest system file. Click Browse to

locate and select the firmware file. Click Upload to upload the file to upgrade.

Figure 6-7 Firmware Upgrade

After the firmware is uploaded, the page below will be shown. If you want to save the

current settings, please click Save Configuration. If you want to restore the device to

factory defaults please click Restore.