User's Manual Part 2
20
Q3. How can I use Spectrum Analysis
to nd the appropriate channel for the
devices?
1. Log in to PharOS, on the 'WIRELESS' page, you can nd the 'Spectrum
Analysis' button as shown in the gure below. Click the button.
2. The following window will pop up. Click 'Yes' and you will then get
into the Spectrum Analysis page.
3. Select the 'Frequency Range' and click the 'Start' button, the PharOS
will begin to analyze the power of the frequency. Watch the curves
for a period of time, and then click 'Stop'. Mark the relatively low and
continuous part of the average curve, and note the corresponding
frequency range.
Here we take the gure below as an example.
into the Spectrum Analysis page.
into the Spectrum Analysis page. into the Spectrum Analysis page.