User's Manual

Archer D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
4.8.5 Wireless MAC Filtering
Choose menu “Wireless 2.4GHz”  ”Wireless M AC Filtering”, you can control the wireless
access by configuring the Wireless MAC Filtering function, shown in Figure 4-37.
Figure 4-37
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
 MAC Addre ss: The wireless station's MAC address that you want to filter.
 Status: The status of this entry, either Enabled or Disabled.
 Host: The wireless network name (SSID).
 Description: A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add Ne w button. The following page will
appear, shown in Figure 4-38:
Figure 4-38
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Addre ss field. The format of the MAC
Address is XX:XX:XX:XX:XX:XX (X is any hexadecimal digit). For example:
00:1D:0F:11:22:33.
2. Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
3. Select Enabled or Disabled for this entry from the Status drop-down list.
4. Select Host from the drop-down list.
5. Click the Save button to save this entry.
49