User's Guide
Table Of Contents
- Chapter 1 About This Guide
- Chapter 2 Introduction
- Chapter 3 Typical Topology
- Chapter 4 Getting Started with the EAP
- Chapter 5 Management Mode
- Chapter 6 Cluster Mode
- Chapter 7 Standalone Mode
119
7.5.4 Backup & Restore
Figure 7-69 Backup & Restore
You can save the current configuration of the EAP as a backup file and restore the configuration
via a backup file. Back up the settings before you upgrade the device or upload a new
configuration file can prevent it from being lost.
Restore function helps you to restore the device to previous settings by uploading a backup file.
7.5.5 Firmware Upgrade
Figure 7-70 Firmware Upgrade
Please log in http://www.tp-link.com/en/support/download/ to download the latest system file.
Click Browse to choose the firmware file. Click Upgrade to upgrade the devices.
NOTE:
3. Please select the proper software version that matches your hardware to upgrade.
4. To avoid damage, please do not turn off the device while upgrading.
5. After upgrading, the device will reboot automatically.