User's Guide

13
6.2 Cluster
The Cluster page is shown below.
Figure 6-1 Cluster Page
6.2.1 Cluster
Customize the cluster name in this zone. The cluster name will be synchronized automatically
across the cluster to all Member EAPs. The EAPs have to have the same cluster name to form a
cluster.
Figure 6-2 Modify the Cluster Name
6.2.2 AP List
AP List displays all the EAPs in this cluster. Click in the Settings column to configure the
private parameters of the selected EAP. These private parameters take effect on each EAP
separately, which helps to optimize the network performance. Configurable parameters include
Device Name, Radio, IP Settings, Load Balance and SSID Override
.