User's Guide
Table Of Contents
- Chapter 1 About This Guide
- Chapter 2 Introduction
- Chapter 3 Typical Topology
- Chapter 4 Getting Started with the EAP
- Chapter 5 Management Mode
- Chapter 6 Cluster Mode
- Chapter 7 Standalone Mode
19
Figure 6-9 SSID Override
Enable:
Check the box to enable SSID Override.
VLAN:
Check the box to enable VLAN and set a VLAN ID (ranges from 0 to 4094) to the
wireless network. VLAN 0 means VLAN function is disabled. Wireless networks
with the same VLAN ID are grouped to a VLAN.
SSID:
Enter an easily-identified SSID to override the SSID shared with other clustered
EAPs.
Password:
Set a WPA2-PSK password to access the wireless network. Only previous
passwords with PSK encryption can be overridden.