User's Guide
Table Of Contents
- Chapter 1 About This Guide
- Chapter 2 Introduction
- Chapter 3 Typical Topology
- Chapter 4 Getting Started with the EAP
- Chapter 5 Management Mode
- Chapter 6 Cluster Mode
- Chapter 7 Standalone Mode
21
Figure 6-11 Wireless Settings Page
6.3.1.1
Wireless Basic Settings
In Cluter mode, parameters in Figure 6-15 including Wireless Mode, Channel Width, Channel and
Tx Power are not available.
Figure 6-12 Wireless Basic Settings
2.4GHz Wireless Radio:
Check the box to enable 2.4GHz Wireless Radio.
6.3.1.2
SSIDs
SSIDs can work together with switches supporting 802.1Q VLAN. The EAP can build up to eight
virtual wireless networks per radio for users to access. At the same time, it adds different VLAN