User's Manual

Wall

4mm in diameter

3. Insert the plastic wall anchors into the 4mm holes and secure the mounting

bracket to the wall by driving the self-tapping screws into the anchors.

4. Place the EAP into the mounting bracket by aligning ARROW 1 with ARROW 2,

and turn the EAP clockwise to lock it into place.

4. Powering Mode

The EAP can be powered via a PSE device (e.g., a PoE switch) or its power adapter.

■

Via PSE Device

EAP220

TL-SG3424P

1. Connect the EAP and the PSE device through an Ethernet cable.

2. Press the ON/OFF button on the interface panel of the EAP.