User's Manual
12
Step 2: Wireless Access
1. Make sure the management host is set to obtain an IP address
automatically.
2. Join the wireless network using the default SSID TP-LINK_2.4GHz_XXXXXX or
TP-LINK_5GHz_XXXXXX, where XXXXXX represents the last 6 characters of
the EAP's MAC address. Password is not required.
Step 3: Quick Setup
1. Open a web browser and type in http://tplinkeap.net to access the EAP's
web management page. Use admin
(all lowercase) for both username and
password to login. Please note that in Cluster mode, the login will be directed
to the Master EAP.
2. Create a new user name and password
.
3. Follow the step-by-step instructions to complete the Quick Setup. Any
conīægurations you make to the Master EAP will automatically synchronize to all
the other EAPs.
Congratulations! Now you can enjoy the wireless network.
If you changed the default SSID and password, you need to reconnect to the EAP
using the new SSID and password to perform more configurations.
Option 2: Wired Login
Router
Switch
Master EAP
Member EAPMember EAP
Cluster
Management Host
Internet