User's Manual

Step 1: Power on

Power on the EAPs. The EAP that first completes system initialization will be

selected as the Master EAP.

Step 2: Wired Access

1. Make sure the management host is set to obtain an IP address

automatically.

2. Access your DHCP server and locate the IP address of the EAPs.

Step 3: Quick Setup

1. Open a web browser and type in the IP address of the Master EAP to login

to the web server. The default user name and password are admin (all

lowercase). In the Cluster mode, the login will be directed to the Master EAP.

2. Create a new user name and password.

3. Follow the step-by-step instructions to complete Quick Setup. Any

configurations you make to the Master EAP will automatically synchronize to all

the other EAPs.

Congratulations! Now you can enjoy the wireless network.