User's Manual

03
RESET
With the device powered on, press and hold the RESET button for about 8 seconds
until the LED ashes Red/Green/Yellow alternatively twice, then release the button.
The device will restore to factory default settings.
CONSOLE
This port is used to connect to the serial port of a computer or a terminal to check
and monitor system information of the device.
ETHERNET
This port is used to connect to a router to transmit data or to a PSE device, such
as a switch, for both data transmission and Power over Ethernet (PoE) through
Ethernet cabling.
ON/OFF
Press this button to turn on/off the device.
POWER
The power port is used connect the device to an electrical wall outlet via power
adapter. Please only use the provided power adapter. Refer to Powering Mode to
learn how to power the device via PoE or power adapter.
ARROW 1
This arrow is used to align with ARROW 2 on the mounting bracket to lock the EAP
into place. Please refer to Mounting Bracket to locate ARROW 2.