User Manual

05
3. Installation
■
Ceiling Mounting
Note:
■
Make sure the thickness of the ceiling is less than 18mm and
the ceiling can bear at least five kilograms.
■
If the ceiling is made of low-strength material like gypsum, it is
not recommended to mount the EAP on the ceiling. If it has to
do, add a layer of strong material under the nut to ensure the
EAP is mounted solidly.
1. Remove the ceiling tile.
Remove the Ceiling Tile
2. Place the mounting bracket at the center of the ceiling tile. Mark the positions
of three mounting slots and the hole for Ethernet cable to feed through.
L≈40mm
L
Mark of the Hole for Ethernet
cable to feed through
Mark the Positions