User's Manual

5.1.1 Wireless Basic Settings
Figure 5-3 Wireless Basic Settings
2.4GHz
Wireless Radio:
Check the box to enable 2.4GHz Wireless Radio.
Wireless Mode: Select the protocol standard for the wireless network.
For 2.4GHz network, we recommend that select 802.11b/g/n, in which
way clients supporting any one of these modes can access your
wireless network.
For 5GHz network, we recommend that select 802.11a/n or
802.11a/n/ac, in which way clients supporting any one of these modes
can access your wireless network.
Channel Width: Select the channel width of this device.
According to IEEE 802.11n standard, using a higher bandwidth can
increase wireless throughp
ut. However, users may choose lower
bandwidth due to the following reasons:
1. To increase the available number of channels within the limited total
bandwidth.
2. To avoid interference from overlapping channels occupied by other
devices in the environment.
3. Lower
bandwidth can concentrate higher transmit power,
increasing stability of wireless links over long distances.
TIPS:
Proceed to the following chapter for information on configuring the wireless network of
the EAP. The configuring information of 2.4GHz is taken as the example.
9