User's Manual

6.3.1 User List
Figure 6-12 User List
MAC: Displays the MAC address of the client.
Band: Displays the band the client is in.
Access
Point:
Displays the name of the device to which the client is connected.
SSID: Displays the SSID the client is connected to.
SNR(dB):
Signal to Noise Ratio, the power ratio between the received wireless
signal strength and the envir
onmental noise strength. The bigger the
value of SNR, the better network performance the device provides.
CCQ(%):
Displays the wireless Client Connection Quality (CCQ). CCQ refers to the
ratio of current effective transmission bandwidth and the theoretically
maximum available bandwidth. CCQ reflects the actual link condition.
Rate(Mbps): Displays the data rate at which the client transmits wireless packets.
Down(Byte): Displays the throughput of the downstream data.
Up(Byte): Displays the throughput of the upstream data.
Active Time: Displays the amount of time the client has been connected to the device.
6.3.2 Portal Authenticated Guest
The
Portal Authenticated Guest
displays information about clients that have set up
valid authentication.
Figure 6-13 Portal Authenticated Guest
47