User's Manual

Server Port:
Designate a server port for web server in HTTP mode. By default the port
is 80.
Session
Timeout:
Set the session timeout time. If you do nothing with the web
management page within the timeout time, the system will log out
automatically. Please login a
gain if you want to go back to web
management page.
7.3 Management Access
Management Access Control allows you to configure up to four MAC addresses of the
hosts that are allowed to log in to the web management page of the EAP. Click Add PC’s
MAC and the MAC address of the current host will be added to MAC address list.
Following is the page of
Management Access
.
Figure 7-7 Management Access Page
MAC
Authentication:
Check the box to enable MAC Auth
entication. After MAC
Authentication is enabled, only the PCs in MAC address list can log in
the device’s web management page. By default this function is
disabled. All PCs in LAN can log in and manage the device.
MAC1~MAC4:
Enter the MAC addresses of the PCs which are authorized to log in the
device.
7.4 LED ON/OFF
Following is the page of
LED ON/OFF
. By default the LED is on.
53