User's Manual

SA Lifetime:
Specify IPsec SA Lifetime for IKE mode.
● Manual Mode
IPsec Proposal:
Select the IPsec
Proposal. Only one proposal can be selected on
Manual mode. You need to first create the IPsec Proposal.
Incoming SPI:
Specify the Incoming SPI (Security Parameter Index) manually. The
Incoming SPI here must match the Outgoing SPI value at the other end
of the tunnel, and vice versa.
AH Authentication
Key-In:
Specify the inbound AH Authentication Key manually if AH protocol is
used in the corresponding IPsec Proposal. The inbound key here must
match the outbound AH authentication key at the other end o
f the
tunnel, and vice versa.
ESP Authentication
Key-In:
Specify the inbound ESP Authentication Key manually if ESP protocol
is used in the corresponding IPsec Proposal. The inbound key here
must match the outbound ESP authentication key at the other end of
the tunnel, and vice versa.
ESP Encryption:
Key-In:
Specify the inbound ESP Encryption Key manually if ESP protocol is
used in the corresponding IPsec Proposal. The inbound key here must
match the outbound ESP encryption key at the other end of the tunnel,
and vice versa.
Outgoing SPI:
Specify the Outgoing SPI (Security Parameter Index) manually. The
Outgoing SPI here must match the Incoming SPI value at the other end
of the tunnel, and vice versa.
AH Authentication
Key-Out:
Specify the outbound AH Authentication Key manually if AH protocol is
used in the corresponding IPsec Proposal. The outbound key here
must match the inbound AH authentication key at the other end of the
tunnel, and vice versa.
ESP Authentication
Key-Out:
Specify the outbound ESP Authentication Key manually if ESP protocol
is used in the corresponding IPsec Proposal.
The outbound key here must match the inbound ESP authentication
key at the other end of the tunnel, and vice versa.
-97-