User's Manual

3.6.3.1 L2TP/PPTP Tunnel
On this page, you can configure the L2TP/PPTP VPN.
Choose the menu VPN→L2TP/PPTP→L2TP/PPTP Tunnel to load the following page.
Figure 3-68 L2TP/PPTP Tunnel
The following items are displayed on this screen:
 General
Hello Interval:
Specify the interval to send hello packets.
Primary/Secondary
DNS:
Enter the Primary/Secondary DNS server address. The default IP is
"0.0.0.0", which means the LAN IP of the router is used as the DNS
server address.
NetBIOS Passthrough:
Specify whether to enable NetBIOS Passthrough function. If enabled,
the NetBIOS packet is permitted to broadcast through VPN tunnel.
 L2TP/PPTP Tunnel
Protocol:
Select the protocol for VPN tunnel. Options include L2TP and PPTP.
-101-