User's Manual

3.8.1.2 Login Parameter
On this page, you can configure and modify the Http, Https and Telnet port.
Choose the menu Maintenance→Admin Setup→Login Parameter to load the following page.
Figure 3-83 Login Parameter
The following items are displayed on this screen:
 General
Http Management Port:
Enter the Http Management Port for the router. The default port is 80.
Https Management Port:
Enter the Https Management Port for the router. The default port is
443.
Telnet Management Port:
Enter the Telnet Management Port for the router. The default port is
23.
Web Idle Timeout:
Enter a timeout period that the r
outer will log you out of the
Web-
based Utility after a specified period (Web Idle Timeout) of
inactivity. The default value is 6.
Telnet Idle Timeout:
Enter a timeout period that the router will log the remote PCs out of
the Web-based Utility after a specified period (Telnet Idle Timeout) of
inactivity. The default value is 10.
Note:
 The default Http Management Port is 80. If the port is changed, you should type in the new
address, such as http://192.168.0.1:XX (“XX” is the new management port number). E.g.: If the
Http Management Port is changed to 88, type http://192.168.0.1:88 in the address filed to login the
router.
 The new timeout period will take effect next login.
-119-