User's Manual

Figure 3-90 SNMP
The following items are displayed on this screen.
 General
SNMP:
Enable or disable the SNMP function.
Device Name:
Enter the name of the router.
Location:
Enter the location of the router.
Contact:
Enter the name of the network administrator for the r
outer, as well as a
contact number or e-mail address.
Get Community:
Enter the password that allows read-only access to the router’s SN
MP
information. The default password is public.
Set Community:
Enter the password that allows read/write access to the r
outer’s SNMP
information. The default password is private.
SNMP Trusted Host:
You can restrict access to the router’s SNMP information by IP
address.
Enter the IP address of the
SNMP Trusted Host, which is allowed to
access the router’s SNMP information
. If this field is left blank, then
access from any IP address is permitted.
3.8.4 Statistics
3.8.4.1 Interface Traffic Statistics
Interface Traffic Statistics screen displays the detailed traffic information of each port and extra
information of WAN ports.
Choose the menu Maintenance→Statistics→Interface Traffic Statistics to load the following page.
-125-