User's Manual

 Tracert
Destination IP/Domain:
Enter destination IP address or Domain name here. Then select a port
for testing, if Auto is selected, the router
will select the interface of
destination automatically. After clicking the <Start> button, the r
outer
will send Tracert packets to test t
he connectivity of the gateways
during the journey from the source to destination of the test data and
the results will be displayed in the box below.
3.8.5.2 Online Detection
On this page, you can detect the WAN port is online or not.
Choose the menu Maintenance→Diagnostics→Online Detection to load the following page.
Figure 3-94 Online Detection
The following items are displayed on this screen:
 General
Port:
Select the port to be detected.
Detecting:
Activate or inactivate
Online Detection function. When Online Detection is
active
, WAN status will depend on the result of both PING and DNS
Lookup. When Online Detection is inactive
, WAN status will be detected
according to physical connection status and dial-up status.
Mode:
D
etect automatically or Manually. In Auto mode, gateway will be selected
as destination for PING detection, DNS server of WAN port will be selected
as destination for DNS Lookup. In Manual
Mode, you can configure the
destination for PING and DNS Lookup manually.
Ping:
Enter the destination IP for Ping
in Manual mode. 0.0.0.0 means PING
detection is disabled.
-129-