User's Manual

it must configure an extra multi-nets NAT entry. Only in this way, the remote VPN clients can access
the Internet via the VPN router in the headquarters. The following contents will respectively introduce
the two situations.
1) In the Same Subnet
● IP Address Pool
Choose the menu VPN→L2TP/PPTP→IP Address Pool to load the following page. Enter the Pool
Name and the IP Address Range as the following figure shows. Click the <Add> button to apply.
Figure 4-9 IP Address Pool1
● L2TP/PPTP Tunnel
Choose the menu VPN→L2TP/PPTP→L2TP/PPTP Tunnel to load the following page.
Settings:
Hello Interval: 60
Primary DNS: 202.96.128.86
Secondary DNS: 202.96.128.166
NetBIOS Passthrough: Enable
Protocol: PPTP
Mode: Server
Account Name: PPTP1
Password: abcdefg
Tunnel: Client-to-LAN
Encryption: Enable
IP Address Pool: PPTP1_Dialup_User (you just created)
Status: Activate
-143-