User's Manual

Connection Type:
Select the secondary connection type. Options include Disable,
Dynamic IP and Static IP.
IP Address:
If Static IP is selected, configur
e the IP address of WAN port. If
Dynamic IP is selected, the obtained IP address of WAN port is
displayed.
Subnet Address:
If Static IP is selected, configure the subnet address of WAN port. If
Dynamic IP is selected, the obtained subnet address of WAN port is
displayed.
Status:
Displays the status of secondary connection.
Upstream
Bandwidth:
Specify the bandwidth for transmitting packets on the port.
Downstream
Bandwidth:
Specify the bandwidth for receiving packets on the port.
 PPPoE Status
Status:
Displays the status of PPPoE connection.

“Disabled” indicates that the PPPoE connection type is not
applied.
 “Connecting” indicates that the r
outer is obtaining the IP
parameters from your ISP.
 “Connected” indicates that the router has successfully obtained the
IP parameters from your ISP.
 “Disconnected” indicates that the connection has been manually
terminated or the request of the router has no response from your
ISP. Please ensure that your settings are correct and your network
is connected well. Consult your ISP if this problem remains.
IP Address:
Displays the IP address assigned by your ISP.
Gateway Address:
Displays the Gateway Address assigned by your ISP.
Primary DNS:
Displays the IP address of your ISP’s Primary DNS.
Secondary DNS:
Displays the IP address of your ISP’s Secondary DNS.
-17-