User's Manual

Account Name:
Enter the Account Name provided by your ISP. If you are not clear,
please consult your ISP.
Password:
Enter the Password provided by your ISP.
Server IP:
Enter the Server IP provided by your I S P.
MTU:
MTU (Maximum Transmission Unit) is the maximum data unit
transmitted by the physical network. It can be set in the range of
576-1460. The default MTU is 1460. It is recommended to keep the
default value if no other MTU value is provided by your ISP.
Active Mode:
You can select the proper Active Mode according to your need.
 Manual: Select this option to manually activate or terminate the
Internet connection by the <Connect> or <Disconnect> button. It is
optimum for the dial-up connection charged on time.
 Always-on: Select this option to keep the connection always on.
The connection can be re-
established automatically when it is
down.
Secondary
Connection:
Here allows you to configure the secondary connection. Dynamic IP
and Static IP connection types are provided.
Connection Type:
Select the secondary connection type. Options include Disable,
Dynamic IP and Static IP.
IP Address:
If Static IP is selected, configure the IP address of WAN port. If
Dynamic IP is selected, the IP address of WAN
port obtained is
displayed.
Subnet Mask:
If Static IP is selected, configure the subnet mask of WAN port. If
Dynamic IP is select, the subnet mask of WAN port obtained is
displayed.
Default Gateway:
If Static IP is selected, configure the default gateway. If Dynamic IP is
selected, the obtained default gateway is displayed.
Primary DNS/
Secondary DNS:
If Static IP is selected, configure the DNS. If Dynamic IP is selected, the
obtained DNS is displayed.
-19-