User's Manual

Channel:
This field determines which operating frequency will be used. The default
channel is automatic and the router will choose the best chan
nel
automatically. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
Mode:
Select the desired mode.
11b only - Select if all of your wireless clients are 802.11b.
11g only - Select if all of your wireless clients are 802.11g.
11n only- Select only if all of your wireless clients are 802.11n.
11bg mixed -
Select if you are using both 802.11b and 802.11g wireless
clients.
11bgn mixed - Select if you are using a mix of 802.11b, 11g, an
d 11n
wireless clients.
Select the desired wireless mode. When 802.11b mode is selected, only
802.11b wireless stations can connect to the r
outer. When 802.11g mode is
selected, only 802.11g wireless stations can connect to the r
outer. When
802.11n mode is
selected, only 802.11n wireless stations can connect to
the router. It is strongly recommended that you set the Mode 11bgn mixed
,
and all of 802.11b, 802.11g and 802.11n wireless stations can connect to
the router.
Channel Width:
Select the channel width from the drop-
down list. The default setting is
automatic
, which can adjust the channel width for your clients
automatically.

Wireless Parameter
SSID:
Enter a name for the wireless network. The same name of SSID
(Service Set Identification) must be assigned to all wireless devices
in
your network.
Considering your wireless network security, the default
SSID is set to be TP-LINK
_XXXXXX (XXXXXX indicates the last unique
six numbers of each r
outer’s MAC address). This value is
case-sensitive. For example, TEST is NOT the same as test.
Description:
Enter the description for the SSID.
-39-