User's Manual

SSID Broadcast:
Enable or disable the SSID Broadcast. When wireless clients survey the
local area for wireless networks to associate with, they will detect the
SSID broadcast by the router. If the SSID Broadcast is enabled
, the
Wireless router will broadcast its name (SSID) on the air.
AP Isolation
Enable or disable the AP Isolation. This function
can isolate wireless
stations in your network from each other. Wireless devices will be able to
communicate with the router but not with each other.
Security:
Specify the security option of the wireless network. If you do not want to
use wireless security, select “Disable Security”
, otherwise select one
Security option from the drop-
down list. It’s strongly recommended to
choose one of the security options to enable security.
There are three wireless security options supported by the r
outer:
WPA-PSK/WPA2-PSK,
WPA/WPA2 and WEP. It is recommend to
choose WPA-PSK/WPA2-PSK.
The detail information of the three security options will be introduced
below.
1) WPA-PSK/WPA2-PSK
It’s the WPA/WPA2 authentication type based on pre-shared passphrase. The default security
option of the router is WPA-PSK/WPA2-PSK.
Auth Type:
Choose the Auth type of the WPA-PSK/WPA2-
PSK security on the
drop-down list. The default setting is Automatic, which can select
WPA-PSK (Pre-shared key of WPA) or WPA2-PSK (Pre-
shared key of
WPA) automatically based on the wireless station's capability and request.
-40-