User's Manual

Security:
Specify the security option of the wireless network. If you do not want to
use wireless security, select
“Disable Security”, otherwise select one
Security option from the drop-
down list. It’s strongly recommended to
choose one of the security options to enable security.
There are three wireless security options supported by the r
outer:
WPA-PSK/WPA2-PSK, WPA/WPA2 and WEP. It is recommend to choose
WPA-PSK/WPA2-PSK.
The detail information of the three security options will be introduced
below.
SSID Broadcast:
Enable or disable the SSID Broadcast. If you enable the SSID Broadcast
,
the Wireless router will broadcast its name (SSID) on the air.
Guest Network:
Enable or disable the Guest Network. If the Guest Network is enabled, the
hosts in this network cannot communicate with the LAN port or other
SSIDs.
AP Isolation:
This function can isolate wireless stations in your network
from each other.
Wireless devices will be able to communicate with the r
outer but not with
each other.
Enable/Disable this
SSID
Enable or disable this SSID. If you select this option, the host which
passed the validation will be allowed to connect to this SSID;
otherwise,
the router will refuse this host's request.
1) WPA-PSK/WPA2-PSK
It’s the WPA/WPA2 authentication type based on pre-shared passphrase.
-45-