User's Manual

3.2.1.3 WDS
With the WDS function, the router can bridge two or more WLANs.
Choose the menu Wireless→Wireless Setting→WDS to load the following page.
Figure 3-27 WDS Configuration
The following items are displayed on this screen:

General
WDS:
Enable or disable the WDS function. With this function, the r
outer can
bridge two or more WLANs.
Scan:
Click this button, and you can search the APs that run in the channel
s
this device supports.

Parameter
SSID(to be bridged):
The SSID of the AP your rou
ter is going to connect to as a client. You can
also use the search function to select the SSID to join.
BSSID(to be bridged):
The BSSID of the AP your r
outer is going to connect to as a client. You
can also use the search function to select the BSSID to join.
Key Type:
This option should
be chosen according to the AP's security
configuration. It is recommended that the security type is the same as
your AP's security type
-49-