User's Manual
Table Of Contents
- TL-ER604W(UN)1.0-UG-2016.4.27修改
- 路由器
- TL-ER604W(UN)1.0-UG-2016.4.27修改
- Package Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Configuration
- Chapter 4 Application
- Appendix A Hardware Specifications
- Appendix B FAQ
- Appendix C Glossary
WEP Key Index:
This option should be chosen if the key type is WEP (ASCII) or WEP
(HEX).It indicates the index of the WEP key.
Auth Type:
This option should be chosen if the key type is WEP (ASCII) or WEP
(HEX).It indicates the authorization type of the Root AP.
Key
:
If the AP your r
outer is going to connect needs password, you need to fill
the key in this blank.
Tips:
The Multi-SSID function will be disabled if WDS is enabled.
3.2.1.4 Wireless Advanced
On this page, you can configure the wireless advanced parameters.
Choose the menu Wireless→Wireless Setting→Wireless Advanced to load the following page.
Figure 3-28 Wireless Advanced
The following items are displayed on this screen:
General
WMM: WMM (Wi-Fi MultiMedia) can guarantee the packets with high-
priority
messages transmitted preferentially. You are recommended
to enable
this function.
-50-