User's Manual

Figure 3-38 Port Triggering
The following items are displayed on this screen:
 Port Triggering
Name:
Enter a name for Port Triggering entries. Up to 28 characters can be
entered.
Interface:
Select an interface for forwarding data packets.
Trigger Port:
Enter the trigger port number or the range of port. Only when the trigger
port initiates connection will all the corresponding incoming ports open
and provide service for the applications, otherwise the incoming ports
will not open.
Trigger Protocol:
Select the protocol used for trigger port.
Incoming Port:
Enter the incoming port number or range of port numbers. The
incoming port will open for follow-up connection after the trigger port
initiates connection.
Incoming Protocol:
Select the protocol used for incoming port.
Status:
Activate or inactivate the entry.
Note:
 The Trigger Port and Incoming Port should be set in the range of 1-65535. The Incoming Port can
be set in a continuous range such as 8690-8696.
-62-