User's Manual

3.4.2 Traffic Control
Traffic Control functions to control the bandwidth by configuring rules for limiting various data flows. In
this way, the network bandwidth can be reasonably distributed and utilized.
3.4.2.1 Setup
Choose the menu Advanced→Traffic Control→Setup to load the following page.
Figure 3-40 Configuration
The following items are displayed on this screen:
 General
Disable Bandwidth
Control:
Select this option to disable Bandwidth Control.
Enable Bandwidth
Control all the time:
Select this option to enable Bandwidth Control all the time.
Enable Bandwidth
Control When:
With this option selected, the Bandwidth Control will take effect when
the bandwidth usage reaches the specified value.
 Default Limit
Limited Bandwidth:
Default Limit applies only for users that are not constrained by
Bandwidth Control Rules. These users share certain bandwidth with
upper limit configured here. Value 0 means all the remained bandwidth
is available to use.
-64-