User's Manual

The network topology is shown as the following:
Configuration procedure
 On the Static Route page, add a static routing rule for LAN2 with destination address 192.168.2.0
(LAN2’s IP address) and next hop address 192.168.0.2 (IP address of the cascading LAN port) as
shown in the following figure. Then click the <Add> button.
 Add a static routing rule for LAN3 by referring to step 2.
The static routing rules are shown in the following figure.
3.4.5.2 RIP
RIP (Routing Information Protocol) is a dynamic route protocol using distance vector algorithm to select
the optimal path. With features of easy configuration, management and implementation, it is widely used
in small and medium-sized networks such as the campus network.
The distance of RIP refers to the hop counts that a data packet passes through before reaching its
destination, the value range of which is 1–15. It means the destination cannot be reached if the value is
more than 15. Optimal path indicates the path with the fewest hop counts. RIP exchanges the route
information every 30 seconds by broadcasting UDP packets. If one router has not sent route information
-75-