User's Guide
Table Of Contents
- Package Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Configuration
- Chapter 4 Application
- Appendix A Hardware Specifications
- Appendix B FAQ
- Appendix C Glossary
-108-
Figure 3-67 L2TP/PPTP Tunnel
The following items are displayed on this screen:
¾ General
Enable VPN-to-Internet:
Specify whether to enable VPN-to-Internet function. If enabled, the
VPN client is permitted to access the LAN of the server and Internet.
Hello Interval:
Specify the interval to send hello packets.
¾ L2TP/PPTP Tunnel
Protocol:
Select the protocol for VPN tunnel. Options include L2TP and PPTP.
Mode:
Specify the working mode for this Router. Options include:
z Client: In this mode, the device sends a request to the remote
L2TP/PPTP server initiatively for establishing a tunnel.
z Server: In this mode, the Router responds the request from the
remote client for establishing a tunnel.