User's Guide
Table Of Contents
- Package Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Configuration
- Chapter 4 Application
- Appendix A Hardware Specifications
- Appendix B FAQ
- Appendix C Glossary
-127-
New User Name:
Enter a new user name for the Router.
New Password:
Enter a new password for the Router.
Confirm New
Password:
Re-enter the new password for confirmation.
Note:
● The factory default password and user name are both admin.
● You should enter the new user name and password when next login if the current username and
password has been changed.
● The new user name and password must not exceed 31 characters in length and must consist of
numbers or letters. All the fields are case-sensitive.
3.8.1.2 Login Parameter
On this page, you can configure and modify the Web and Telnet port.
Choose the menu Maintenance→Admin Setup→Login Parameter to load the following page.
Figure 3-82 Login Parameter
The following items are displayed on this screen:
¾ General
Web Management Port:
Enter the Web Management Port for the Router.
Telnet Management Port:
Enter the Telnet Management Port for the Router.
Web Idle Timeout:
Enter a timeout period that the Router will log you out of the
Web-based Utility after a specified period (Web Idle
Timeout) of inactivity.