User's Guide

-136-
Destination IP/Domain:
Enter destination IP address or Domain name here. Then select a port
for testing, if Auto is selected, the Router will select the interface o
f
destination automatically. After clicking the <Start> button, the Router will
send Tracert packets to test the connectivity of the gateways during the
j
ourney from the source to destination of the test data and the results will
be displayed in the box below.
3.8.5.2 Online Detection
On this page, you can detect the WAN port is online or not.
Choose the menu Maintenance→Diagnostics→Online Detection to load the following page.
Figure 3-92 Online Detection
The following items are displayed on this screen:
¾ General
Port:
Select the port to be detected.
Detecting:
A
ctivate or inactivate Online Detection function. When Online Detection is
active, WAN status will depend on the result of both PING and DNS Lookup.
When Online Detection is inactive, WAN status will be detected according to
physical connection status and dial-up status.
Mode:
Detect automatically or Manually. In Auto mode, gateway will be selected as
destination for PING detection, DNS server of WAN port will be selected as
destination for DNS Lookup. In Manual Mode, you can configure the
destination for PING and DNS Lookup manually.