User's Guide
Table Of Contents
- Package Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Configuration
- Chapter 4 Application
- Appendix A Hardware Specifications
- Appendix B FAQ
- Appendix C Glossary
-138-
Status:
Displays the status of time capturing
¾ Config
Get GMT:
When this option is selected, you can configure the time zone and the IP
Address for the NTP Server. The Router will get GMT automatically if it has
connected to a NTP Server.
z Time Zone: Select your local time.
z Primary/Secondary NTP Server: Enter the IP Address for the NTP Server.
Manual:
With this option selected, you can set the date and time manually.
Synchronize with
PC’S Clock:
With this option selected, the administrator PC’s clock is utilized.
Note:
● If Get GMT function cannot be used properly, please add an entry with UDP port of 123 to the
firewall software of the PC.
● The time will be lost when the Router is restarted. The Router will obtain GMT time automatically
from Internet.
3.8.7 Logs
The Log system of Router can record, classify and manage the system information effectively.
Choose the menu Maintenance→Logs→Logs to load the following page.
Figure 3-94 Logs