User's Guide
Table Of Contents
- Package Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Configuration
- Chapter 4 Application
- Appendix A Hardware Specifications
- Appendix B FAQ
- Appendix C Glossary
-52-
BSSID(to be bridged):
The BSSID of the AP your Router is going to connect to as a client. You
can also use the search function to select the BSSID to join.
Key Type:
This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same as
your AP's security type
WEP Key Index:
This option should be chosen if the key type is WEP (ASCII) or WEP
(HEX).It indicates the index of the WEP key.
Auth Type:
This option should be chosen if the key type is WEP (ASCII) or WEP
(HEX).It indicates the authorization type of the Root AP.
Key： If the AP your Router is going to connect needs password, you need to
fill the key in this blank.
Tips:
The Multi-SSID function will be disabled if WDS is enabled.
3.2.1.4 Wireless Advanced
On this page, you can configure the wireless advanced parameters.
Choose the menu Wireless→Wireless Setting→Wireless Advanced to load the following page.
Figure
3-27 Wireless Advanced
¾ General