User's Guide
Table Of Contents
- Package Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Configuration
- Chapter 4 Application
- Appendix A Hardware Specifications
- Appendix B FAQ
- Appendix C Glossary
-54-
3.2.2 MAC Filtering
On this page, you can control the wireless access by configuring the MAC Filtering.
Choose the menu User Wireless→MAC Filtering to load the following page.
Figure
3-28 MAC Filtering
¾ General
Each SSID can be configured the MAC Address Filtering rules. You can select a SSID in the
SSID drop-down list. To create a new SSID, please refer to 3.2.1.2 Multi-SSID.
To control some of the hosts to access the wireless network, it is recommended to select “Enable
Wireless MAC Address Filtering” and select one filtering rule according to need.
Click <Save> button to apply the setting.
¾ Filtering Rules
MAC Address:
Enter the MAC Address of the host to be filtered.
Description:
Enter a description for the entry. Up to 28 characters can be entered.
¾ Rule List
In this table, you can view the information of the Filtering Rules and edit them by the Action buttons.