User's Guide
Table Of Contents
- Package Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Configuration
- Chapter 4 Application
- Appendix A Hardware Specifications
- Appendix B FAQ
- Appendix C Glossary
-78-
Choose the menu Advanced→Routing→Static Route to load the following page.
Figure 3-47 Static Route
The following items are displayed on this screen:
¾ Static Route
Destination:
Enter the destination host the route leads to.
Subnet Mask:
Enter the Subnet Mask of the destination network.
Next Hop:
Enter the gateway IP address to which the packet should be sent next.
Interface:
Select the physical network interface, through which this route is
accessible.
Metric:
Defines the priority of the route. The smaller the value is, the higher the
priority is. The default value is 0. It is recommended to keep the default
value.
Description:
Give a description for the entry.
Status:
Activate or inactivate the entry.
¾ List of Rules
You can view the information of the entries and edit them by the Action buttons.