User's Manual

ManualsBrandsTP-Link Technologies ManualsElectronicsSmart Wi-Fi Plug with Energy Monitoring

Table Of Contents

Quick Start Guide

Support

Visit www.tp-link.com/support for technical support

and troubleshooting information.

7106507172 REV 2.0.0

Smart Wi-Fi Plug Installation

1 Download Kasa for Mobile from the App Store

or Google Play.

2 Connect your mobile device to a 2.4GHz Wi-Fi

network.

3 Launch Kasa and follow the app instructions to

connect the Smart Plug to your network.

Note: The Smart Plug only supports the 2.4GHz networks.

Sketch 9:41 AM 100%

Power up your Smart Plug

Plug in your Smart Plug.

The Wi-Fi light will turn solid amber.

Sketch 9:41 AM 100%

DONE

Great!

Your Smart Plug is all set up. It is

now saved in your Device List.

Add Device

Sketch 9:41 AM 100%

Smart Plug Smart Plug Mini

Smart Bulb

Smart Switch

OR scan

QR code

HS110

Summary of content (5 pages)

PAGE 1
Quick Start Guide HS110 Smart Wi-Fi Plug Installation 1 Download Kasa for Mobile from the App Store or Google Play. OR scan QR code 2 Connect your mobile device to a 2.4GHz Wi-Fi network. Note: The Smart Plug only supports the 2.4GHz networks. 3 Launch Kasa and follow the app instructions to connect the Smart Plug to your network. Sketch 9:41 AM 100% Add Device Sketch 9:41 AM 100% Sketch 9:41 AM 100% Power up your Smart Plug Plug in your Smart Plug.
PAGE 2
Smart Wi-Fi Plug Press and hold for 5 seconds or until the Wi-Fi LED blinks amber and green to initiate the app onboarding process. Press and hold for 10 seconds or until the Wi-Fi LED blinks amber rapidly to factory reset. Supported Load Types: Coffee Maker: 800W Desk Lamp: 235.2W LCD: 270W Heater: 1500W Humidiﬁer: 260W Iron: 1500W Toaster: 850W Tower Fan: 50W Blinking amber and green: App onboarding process. Blinking green: Connecting to the network. Green: Network connection established.
PAGE 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 4
） This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 5） l’appareil ne doit pas produire de brouillage; 6） l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement.
PAGE 5
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information  Keep the device away from water, fire, humidity or hot environments.  Do not attempt to disassemble, repair, or modify the device.  Do not use damaged charger or USB cable to charge the device.