User’s Manual HS200 Smart Wi-Fi Light Switch 1910012025 REV 2.0.
Copyright & Trademarks Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. App Store is a trademark of Apple Inc.
Contents 4 5 5 7 Introduction Product Requirements Smart Wi-Fi Light Switch Installation Using Kasa with Smart Switches 7 Kasa Account 7 Kasa Settings 8 Customizing Smart Switches 9 Scheduling 9 Creating Scenes 11 Away Mode 12 Runtime Summary 13 Maintaining the Smart Switches 13 Firmware Update 14 Resetting 15 Troubleshooting 15 Frequently Asked Questions 16 Usage Tips 16 Support 17 Specifications 17 Limited Warranty
User’s Manual Smart Wi-Fi Light Switch Introduction TP-Link Smart Wi-Fi Light Switch, also referred to as “Smart Switch”, is a standard, single-pole, wall light switch that can be controlled via your iOS or Android devices.
User’s Manual Smart Wi-Fi Light Switch Product Requirements • • • In-wall installation with hardwired connections. Neutral wire required. Single-pole light switch. The electrical box should be more than 2 inches deep. A smartphone or tablet running iOS 9 or higher; Android 4.1x or higher. A Wi-Fi connection (supports 802.11b/g/n standard).
User’s Manual Smart Wi-Fi Light Switch Note: The Smart Switch only supports 2.4GHz networks. 3 Remove the faceplate from the Smart Switch. Lauch Kasa and follow the wiring steps provided to instal and connect the Smart Switch to your home network. Sketch 9:41 AM 100% Great! Your Smart Switch is all set up. It is now saved in your Device List. DONE ATTENTION: A neutral wire is required to install the Smart Switch. www.tp-link.
User’s Manual Smart Wi-Fi Light Switch Using Kasa with Smart Switches Kasa Account While you don’t have to have a Kasa account to use TP-Link Smart Home devices, signing up for an account provides added functionality such as: • Synchronization of settings and configurations to all your mobile devices. • Ability to control and configure the devices from outside your home. • Use of third-party services and products such as Amazon Echo. Devices can only be associated with one Kasa account.
User’s Manual Smart Wi-Fi Light Switch Customizing Smart Switches You can personalize your Smart Switches with a descriptive name, icon, and other information from the switch’s details screen. 9:41 PM 100% Device Settings DEVICE CONTROLS Remote Control Device Name Disabled 'SPOU 1PSDI 4XJUDI Device Icon DEVICE TIME Time Zone San Francisco Location Device Time Sept 15, 2015 12:00 PM DEVICE INFO Model HS 0 MAC Address 00:01:02:03:04:05 Hardware Version 1.0.0 Firmware Version 1.0.
User’s Manual Smart Wi-Fi Light Switch Scheduling You can set up your lights to illuminate around your home at specific times on specific days of the week. 9:41 PM 100% 9:41 PM Schedules 100% Create Event At 4 5 6 7 8 No events yet! Add Events by tapping the button on the top right. Your saved event will be listed here. 5 5 0 0 0 : 8 9 0 1 2 am pm Turn my Smart Plug ON Repeating every S M T CANCEL W T F S SAVE 1.
User’s Manual Smart Wi-Fi Light Switch any special occasion. For example, set a customized “Movie Time” to turn on the home theater system plugged into a Smart Plug and dim down the lights in your Entertainment Room to 10% at the same time. Please keep in mind that SCENES can only be set and controlled once you’re signed in to your Kasa account. 9:41 PM 100% Scenes Scenes let you set the mood of your home in one tap.
User’s Manual Smart Wi-Fi Light Switch 9:41 PM 100% Set Scene Next BULBS Party Bulb 60% Bedroom Lamp SWITCHES Main Kitchen Lights ON Side Kitchen Lights OFF PLUGS Christmas Gnome ! PREVIEW Note that you must have at least one Smart Device in order to create a scene. Away Mode Away Mode allows you to automate your Smart Switches in combination with other Smart Home products to respond to your specific schedules.
User’s Manual Smart Wi-Fi Light Switch 2. Tap Select Devices to select your Smart Home devices, and then tap Save. 3. If you want to set a schedule to automate Away Mode so you don’t have to manually activate it, tap Set Schedule. Note: Multiple schedules can be set to repeat weekly on the day(s) of your choice. 4. Within the Create Event screen, set your preferred mode (Away or Home), time, and day(s). 5. Tap Save.
User’s Manual Smart Wi-Fi Light Switch Maintaining the Smart Switches Firmware Update To keep the Smart Switches happy and up-to-date with all the latest improvement and fixes, we recommend that you update the firmware when updates are available. 9:41 PM 100% 9:41 PM 100% Firmware Update Updating firmware New Updates Available Please do not unplug your devices during We found available firmware updates for your reachable devices. the update. Smart Plugs Latest Version: 1.2.
User’s Manual Smart Wi-Fi Light Switch Resetting Resetting the Smart Switch can help you troubleshoot any issues you may have. Please keep in mind that factory resetting a device will erase all of your custom settings and restore them to factory default settings. RESET The RESET button located underneath the Smart Switch has two functions: • Press and hold for about 5 seconds until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode.
User’s Manual Smart Wi-Fi Light Switch Troubleshooting Frequently Asked Questions 1. What should I do when I can’t turn the Smart Switch on/off manually? If the Smart Switch doesn’t respond when pressing the physical switch: 2. 3. • Make sure that you restore power to the Smart Switch at the circuit breaker. • Make sure the Smart Switch is wired correctly. Please consult with a qualified electrician.
User’s Manual Smart Wi-Fi Light Switch within the Kasa Help section. Usage Tips • Place the Smart Switch within the range of your Wi-Fi router or access point (approximately 150 feet). • Avoid physical obstructions and radio interference in the surrounding area. Support Should you encounter any issues with the Smart Wi-Fi Light Switch, please visit our support page at www.tp-link.com/support for web support and troubleshooting information. www.tp-link.
User’s Manual Smart Wi-Fi Light Switch Specifications Height 4.13 in (10.5 cm) Width 1.75 in (4.45 cm) Depth 1.75 in (4.45 cm) Color White 3-Way No 4-Way No Locator Light Yes Number of Poles 1 Wall Plate Included Power 100-120 V ~ 50/60 Hz. Maximum Loads 600W incandescent. Operating Temp. 32o-104o F (0o-40o C) For indoor use only Limited Warranty To learn more about the Limited Warranty for TP-Link products, please visit www.tp-link.us/support/rma. www.tp-link.
User’s Manual Smart Wi-Fi Light Switch FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
User’s Manual Smart Wi-Fi Light Switch This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. RF Exposure Information This device meets the EU requirements (1999/5/EC Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body.
User’s Manual Smart Wi-Fi Light Switch NCC Notice 注意！ 依據 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功 率或變更原設計之特性或功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立即停用， 並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機需忍受 合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。 減少電磁波影響，請妥適使用。 安全諮詢及注意事項 • 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 • 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 • 注意防潮，請勿將水或其他液體潑灑到本產品上。 • 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 • 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 • 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進
User’s Manual Smart Wi-Fi Light Switch AC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. www.tp-link.
