User's Manual

TL-MR3020 Portable 3G/3.75G Wireless N Router
-145-
5.7.2 DHCP Clients List
Choose menu “DHCPė
DHCP Clients List”, and then you can view the information about the
clients attached to the Router in the next screen (shown in Figure 5-28
).
Figure 5-28 DHCP Clients List
¾ ID - The index of the DHCP Client.
¾ Client Name - The name of the DHCP client.
¾ MAC Address - The MAC address of the DHCP client.
¾ Assigned IP - The IP address that the Router has allocated to the DHCP client.
¾ Lease Time - The time of the DHCP client leased. After the dynamic IP address has
expired, a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the
current attached devices, click the Refresh button.
5.7.3 Address Reservation
Choose menu “DHCPė
Address Reservation”, and then you can view and add a reserved
address for clients via the next screen (shown in Figure 5-29). When you specify a reserved IP
address for a PC on the LAN, that PC will always receive the same IP
address each time when
it accesses the DHCP server. Reserved IP addresses should be assigned to the servers that
require permanent IP settings.
Figure 5-29 Address Reservation
¾ MAC Address - The MAC address of the PC for which you want to reserve IP address.
¾ Assigned IP Address - The IP address of the Router reserved.
¾ Status - The status of this entry, either Enabled or Disabled.