User's Manual

TL-MR3020 Portable 3G/3.75G Wireless N Router
-22-
¾ If you choose Access Point (AP), the next screen will appear as shown in Figure 3-23.
This operation mode allows wireless stations to access.
Figure 3-23 Quick Setup – AP
z Wireless Network Name (SSID) - Enter a string of up to 32 characters. The
same Name (SSID) must be assigned to all wireless devices in your network. The
default SSID is set to be TP-LINK _xxxxxx (xxxxxx indicates the last unique six
characters of each Router's MAC address), which can ensure your wireless
network security. But it is recommended strongly that you change your networks
name (SSID) to a different value. This value is case-sensitive. For example,
MYSSID is NOT the same as MySsid.
z Region - Select your region from the pull-down list. This field specifies the region
where the wireless function of the Router can be used. It may be illegal to use the
wireless function of the Router in a region other than one of those specified in this
filed. If your country or region is not listed, please contact your local government
agency for assistance.
z Channel - This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference
problems with another nearby access point. If you select auto, then the AP will
select the best channel automatically.
¾ If you choose Repeater, the next screen will appear as shown in Figure 3-24. In
Repeater mode, the AP with WDS disabled will relays data to an associated root AP. AP
function is enabled meanwhile. The wireless repeater relays signal between its stations