User's Manual

TL-MR3020 Portable 3G/3.75G Wireless N Router
-26-
For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of
0-9, a-f, A-F, and null key is not permitted) or 13 ASCII characters.
For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of
0-9, a-f, A-F, and null key is not permitted) or 16 ASCII characters.
z WPA/WPA2-Personal
Version - You can select one of following versions:
o Automatic - Select WPA-Personal or WPA2-Personal automatically based
on the wireless station's capability and request.
o WPA-Personal - Pre-shared key of WPA.
o WPA2-Personal - Pre-shared key of WPA2.
Encryption - You can select either Automatic, or TKIP or AES.
Password - You can enter ASCII or Hexadecimal characters. For Hexadecimal,
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
Group Key Update Period - Specify the group key update interval in seconds.
The value can be either 0 or at least 30. Enter 0 to disable the update.
z Not Change - If you chose this option, wireless security configuration will not
change!
5. Click Next and you will see the page as shown in Figure 3-27. Click Reboot to reboot the
router and make the settings take effect.
Figure 3-27 Quick Setup – Finish
)
Note:
After the rebooting, please change the PC’s TCP/IP settings to “Obtain an IP address
automatically” and “Obtain DNS server address automatically” according to
3.3.1 PC
configuration, and then reconnect to the network according to 3.3.2 Connect to Network. If
Wireless Security is enabled, you need to enter the password you’ve just set to successfully
finish the connecting.