User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration—3G Router Mode
- Chapter 5. Configuration—Wireless Router / WISP Mode
- Chapter 6. Configuration—AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Security Mode
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/3.75G USB Modem
TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router
z Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
z Default Gateway - Enter the gateway IP address into the box if required.
z Primary DNS - Enter the DNS Server IP address into the box if required.
z Secondary DNS - If your ISP provides another DNS server, enter it into this field.
2. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-14. Set
your wireless parameters. It’s recommended that you edit the following two items, and then
click Next.
1) Create a unique and easy-to-remember Wireless Network Name.
2) Select WPA-Personal/WPA2-Personal under Wireless Security and enter a
password in the field.
Figure 3-14 Quick Setup – Wireless
5. Click Reboot to make the settings take effect.
Figure 3-15 Quick Setup – Finish
-16-